Android User Startup Guide

Go Back to Documentation

Step 1.

Search GOOGLE Play for the FluidSecure App

Step 2.

Install the FluidSecure app

Step 3.

Once the app is installed, click OPEN.

Step 4.

A form will be displayed for you to complete. Fill in the form and then press “Register”

Note: Company name MUST be spelled exactly as entered when you organization setup the account. Contact your Organization’s administrator if you get an error for exact spelling

Step 5.

Click “ALLOW” so that FluidSecure can access this device’s location

Step 6.

Click “DENY” so that FluidSecure cannot make and manage phone calls.

Step 7.

Your Registration information is sent to the FluidSecure Cloud. If your administrator has marked you as ACTIVE, you will be granted permission to obtain fuel. Select “OK.”

If you have not been marked as ACTIVE, you will not be able to obtain fuel until your status is changed by your administrator.

Step 8.

Once you have been authorized your APP will start normally and you will be asked to select a HOSE.

Step 9.

Choose from the HOSES listed at the bottom of the screen, and tap it. Then press “GO.”

The TRAK FS UNLEADED TEST hose that is shown is for example purposes only. The hose displayed on your phone reflects your hose selection, and one used by your specific company.

Note: You can only select a HOSE that your Organization’s administrator has authorized you to use. If you get an error contact your administrator for authorization

Step 10.

Enter Vehicle Number, press “GO”.

Step 11.

The HOSE selection is actually a WiFi on your phone. On the next step you will be re-directed to the iPhone’s Wi-Fi page. Take note of the HOSE name in #4, this the HOSE/WiFi you are to select. This is VERY IMPORTANT. Then from the list shown tap on the WiFi/HOSE name. Wait unitl there is a Check to it. Then click on the TOP LEFT where it says FLUIDSECURE. This returns you to the APP.

Step 12.

Enter your odometer reading from your Vehicle.

Press “GO”

Step 13.

Begin fueling. The screen will display the vehicle you are fueling and the quantity of fluid as it is being pumped. When the vehicle is filled or you stop the fueling by pressing “STOP,” the screen will display the total amount of fuel that has been pumped.

The transaction is then transmitted immediately to the Cloud-based database and the HOSE is available for another fueler.